Rocktrail Z29592 - Manual (Page 17)

17 GB
j Press the MODE button 2 as often as necessary until
you get to set-up procedure for switching the touch
beep function on / off.
j Press the RESET button 1 or the ST. / STP. button 4 to
switch the touch tone on or off.
j Press the ALTI / BARO button 3 to leave the set-up mode.
Q
Switching off the automatic display /
activating the sleep function
If the sleep function is on, the display 5 will switch itself off
if no button has been pressed for 48 hours.
j Press the MODE button 2 as often as necessary until
the date display 9 (day of the week mode) appears
in the display 5 .
j Hold the MODE button 2 down for two seconds to
get to the set-up mode.
j Press the MODE-button 2 as often as necessary until
you get to the set-up to switch the sleep function on / off.
j Press the RESET button 1 or the ST. / STP. button 4 ,
to switch the sleep function on or off.
j Press the ALTI / BARO button 3 to leave the set-up mode.