Rocktrail Z29592 - Manual (Page 22)

22 GB
3. Press the RESET 1 or the ST. / STP. 4 button to set the
value you wish to have.
4. Press the MODE button 2 . The minute display will flash.
5. Repeat steps 3 and 4 to set the values for minutes and
seconds.
6. Press the ALTI / BARO button 3 to get back to count-
down mode.
7. Press the ST. / STP. button 4 to start the countdown.
8. Press the ST. / STP. button 4 again to stop the countdown.
note: During the last 10 seconds, a signal will sound
every second. When the countdown has finished, a
signal will sound for thirty seconds.
9. Press any button to stop signal.
After the signal, the set countdown time will appear in
the display
5 again.
10. Repeat the previous steps to set another countdown time.
Q
Displaying the world times
note: You can display the times in up to 60 towns around
the world.
j Press the MODE button 2 as often as necessary until
WT appears in the display
5 .