Emotiva ERC-2 - Manual (Page 11)

11
ADDITIONAL FEATURES
Four (4) independent power supplies drive each section of the unit independently. This prevents
interactions and noise. The separate power supplies drive:
1. CD mechanism
2. Digital electronics
3. Analog electronics
4. VFD Display
The CD drive mechanism and the digital electronics are encased in a steel substructure that
provides 100% shielding from the audio stages. No noise from the mechanism or digital section
can get into the audio. The ERC-2 features a new, state of the art magnetic loading mechanism,
and uses magnetic clamps, which eliminate any risk of damage when used properly.
The audio board itself is fully isolated from the power supply and digital sections and offers a
fully discrete output stage, capable of producing up to 7V rms of output.
• Slot-load system with halo lighting.
• Lighting has two selectable functions:
o Default setting: All lights stay brightly lit constantly.
o ‘Dim’ setting: Dims the display light, and turns off the halo light and all the front
panel buttons except the On/Standby button. Halo lighting will occur when CDs
are ejected. Activate this mode by pressing the ‘Dim’ button on the ERC-2 remote.
• 12 volt trigger for automatic turn on with other sources
• Milled aluminum remote control