Emotiva ERC-2 - Manual (Page 15)

15
REMOTE CONTROL
1. EJECT
Ejects the disc from the unit.
2. DIM
This is used to dim the display light. It also turns off
the halo light and the lights for all the front panel
buttons except the On/Standby button.
3. STANDBY
Switches the unit between On and Standby mode.
4. PLAY/PAUSE
This is used to Play and Pause the disc.
5. PREV
This is used to jump to the start of the current track
or to jump to the start of the previous track.
6. REV
This is used to search backward and has three
different speeds. Press once and it moves backward,
press again faster, press a third time faster. You
don't have to hold the button down. Hit PLAY or
REV again to resume normal play.
7. FWD
This is used to search forward and has three
different speeds. Press once and it moves forward,
press again faster, press a third time faster. You
don't have to hold the button down. Hit PLAY or
FWD again to resume normal play.
8. NEXT
This is used to advance to the start of the next track.
9. NUMERIC BUTTONS (1 to 10+)
These are used to specify a desired track. Press the
number and the corresponding track will be played
from the start of the track and play the remainder of
the CD.
10. REPEAT
This is used to repeat one track or all of the tracks on a disk. Press the REPEAT button once
and the display reads REPEAT ONE, press the REPEAT button again and the display reads
REPEAT ALL, press the REPEAT button again the display reads REPEAT OFF and the ERC-2
returns to normal play.