EPoX Computer KP6-FX2 - Manual (Page 20)

Award's ROM BIOS provides a built-in Setup program which allows user to
modify the basic system configuration and hardware parameters. The modified
data will be stored in a battery-backed CMOS so data will be retained even when
the power is turned off. In general, the information saved in the CMOS RAM will
stay unchanged unless there is a configuration change in the system, such as hard
drive replacement or a device is added.
It is possible for the CMOS battery to fail, this will cause data lose in CMOS only.
If this does happen you will need to reconfigure your configuration parameter.
To enter Setup Program
Power on the computer and press <Del> key immediately, this will bring you into
BIOS CMOS SETUP UTILITY.
ROM PCI/ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
STANDARD CMOS SETUP SUPERVISOR PASSWORD
BIOS FEATURES SETUP USER PASSWORD
CHIPSET FEATURES SETUP IDE HDD AUTO DETECTION
POWER MANAGEMENT SETUP HDD LOW LEVEL FORMAT
PNP/PCI CONFIGURATION SAVE & EXIT SETUP
INTEGRATED PERIPHERALS EXIT WITHOUT SAVING
LOAD SETUP DEFAULTS
ESC : Quit : Select Item
F10 : Save & Exit Setup (Shift)F2 : Change Color
Time, Date, Hard Disk Type...
Figure 3-1 CMOS SETUP UTILITY
The menu displays all the major selection items. Select the item you need to
reconfigure. The selection is made by moving cursor (press any direction key ) to
the item and press the 'Enter' key. An on-line help message is displayed at the
bottom of the screen as the cursor is moving to various items which provides a
better understanding of each function. When a selection is made, the menu of
selected item will appear so the user can modify associated configuration param-
eters.
Award BIOS SETUP
KP6-FX 2 3-1