EPoX Computer KP6-FX2 - Manual (Page 36)

KP6-FX 2 3-17
3-8 CHANGE SUPERVISOR or USER PASSWORD
To change the password, choose the "SUPERVISOR PASSWORD or USER
PASSWORD" option from the CMOS SETUP UTILITY menu and press
[Enter].
NOTE: Either "Setup" or "System" must be selected in the "Security Option" of
the BIOS FEATURES SETUP menu (Refer to Figure 4-3 for the details).
1. If CMOS is corrupted or the option was not used, a default
password stored in the ROM will be used. The screen will display
the following message:
Enter Password:
Press the [Enter] key to continue after proper password is given.
ROM PCI/ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
Load SETUP Default (Y/N)? Y
STANDARD CMOS SETUP SUPERVISOR PASSWORD
BIOS FEATURES SETUP USER PASSWORD
CHIPSET FEATURES SETUP IDE HDD AUTO DETECTION
POWER MANAGEMENT SETUP HDD LOW LEVEL FORMAT
PNP/PCI CONFIGURATION SETUP
INTEGRATED PERIPHERALS SAVING
LOAD SETUP DEFAULTS
ESC: QUIT :SELECT ITEM
F10:Save & Exit Setup (Shift)F2 :Change Color
Load Setup Defaults Except Standard CMOS SETUP
Figure 3-10 LOAD SETUP DEFAULT
• ECP Mode USE DMA: This field allows the user to sellect DMA1 or
DMA3 for the ECP mode. The default value is DMA3.
DMA1: The filed selects the rounting of DMA1 for the ECP mode.
DMA3: The filed selects the rounting of DMA3 for the ECP mode.
3-7 LOAD SETUP DEFAULTS
The "LOAD SETUP DEFAULTS" function loads the system default data directly
from ROM and initializes the associated hardware properly. This function will be
necessary only when the system CMOS data is corrupted.