Extron Electronics HVA - Manual (Page 11)

1-5 CrossPoint Matrix Switchers • Introduction
Remote control — The CrossPoint switchers are remote controllable, using the
MKP 1000 master control keypad and any combination of MCP 1000 slave
control panels and/or MKP 1000 slave control keypads. The remote control
devices are easy to use and provide tactile buttons for quick selection. Each
MCP 1000 can be used for one-touch switching for a particular output and
selecting global presets. Each MKP 1000 dedicated to an output can be used
to select a different input for that output or to select a preset.
Labeling — Extron’s label software ships with every Extron matrix switcher. You
can create labels to place alongside the front panel input buttons and output
buttons, with names, alphanumeric characters, or color bitmaps for easy and
intuitive input and output selection. Alternatively, labels can be made with
any Brother P-Touch or comparable labeler.
Front panel security lockout (executive mode) — If a CrossPoint Series Switcher is
installed in an open area, where operation by unauthorized personnel may be
a problem, a security lock-out feature can be implemented. When the front
panel is locked, a special button combination is required to unlock the front
panel controller before it can be operated.
Rack mount — The switchers are mountable in any conventional 19” wide rack.
Power — The internal 100VAC to 240VAC, 50/60 Hz, 30 watts (CrossPoint 84, 88,
124, and 128) or 36 watts (CrossPoint 168 and 1616), auto-switchable power
supply of the CrossPoint Series provides worldwide power compatibility.