Extron Electronics HVA - Manual (Page 48)

Programmer’s Guide, cont’d
CrossPoint Matrix Switchers • Programmer’s Guide 4-6
Command/response table for SIS commands (Cont’d)
Command ASCII Command Response Additional description
(host to switcher) (switcher to host)
Resets
Reset global presets Esc zG ZapG•• Clear all global presets.
Reset audio levels Esc zA ZapA•• Reset all audio levels to 0dB.
Reset all mutes Esc zZ ZapZ Unmute all outputs.
Reset whole switcher Esc zXXX ZapXXX Clears all ties and presets, and
resets all audio gains to 0dB.
View ties, gain, and presets
View video output tie V/v X2 % Out X2 •In X3 •Vid
Example: v7% Out07•In02•Vid Output 7 video tied to input 2
video.
View audio output tie V/v X2 $ Out X2 •In X3 •Aud
Example: V3$ Out03•In06•Aud Output 3 audio tied to input 6
audio.
View gain for input V/v X1 G In X1 •Aud= X6
Example: v4G In04•Aud=-02 Gain for input #4 is -2dB.
View all output mutes VM X9 •(up to 16)•Mut Each position listed in the
response is an output, left =
output 1, right = n (n = the
maximum number of outputs for
this model).
Example 2 (CrossPoint 168): VM 0•1•0•2•0•3•0•0•Mut
View preset configuration V/v X7
.
X3 •(up to 16)•Vid• X3 •(up to 16)•Aud
Each position listed in the response is an output, left = output 1, right= output n (n is the
maximum number of outputs). The number in each position is the input tied to the output
represented by that position.
Response description: Input# (I#) assigned to output# (O#)1•I# to O#2...I# to O#n•Vid•I# to O#1•I# to O#2...I# to O#n•Aud
Example
2 (CrossPoint 128 HVA): V0. Preset #0 is current configuration.
01 Output:
Response = tied input:
Video input 8 tied to output 2
02 03 04 05 06 07 08
08•08•08•08•07•09•11•03•Vid•05•05•05•05•07•09•11•00•Aud
01 02 03 04 05 06 07 08
No tied audio input Audio input 5 tied to output 2
Video = Input (I) 8 is tied to outputs (O) 1–4; I7— O5; I9 — O6; I11 — O7; I3 — O8.
Audio = The same as video except that input 5 is tied to outputs 1–4 and no input is tied to output 8.
Information requests
Information request I/i V X1 X X2 •A X1 X X2 •Exe X10 V X1 X X2 = V size, A X1 X X2 = A Size.
Example: i V16X16•A16X16•Exe0 16 Video & 16 Audio inputs and
outputs, front panel unlocked.
Request part number N/n Nxx-xxx-xx See appendix A for part #s.
Example: N N60-242-06 CrossPoint 1616HVA part # is
60-242-06.
Query software version Q/q Ver X11
Example: Q Ver2.00 Sample value only.
2 HV models do not display audio configuration or mutes, and the number of outputs shown varies with the number of
video or audio outputs.