Setting up / setting-up operation, Meanings of the led operating status display, Setting-up operation – Silvercrest Electrical Sockets User Manual
Page 6
10 GB/IE
Setting up / Setting-up operation
8. Every remote-controlled socket also
has a manual ON / OFF switch
5
.
You can switch the remote-controlled
socket on and off without using the
remote control. The LED operating
status display
6
will indicate
whether the remote-controlled socket
is in the ON / OFF mode.
Q
Meanings of the
LED operating status
display
Remote-controlled socket with-
out dimmer FSE B 20-A:
j
The LED operating status display
6
will shine when the remote-controlled
socket is switched on.
j
The LED operating status display
6
will not shine when the remote-con-
trolled socket is switched off.
Remote-controlled socket with
dimmer FSD B 20-A:
j
The LED operating status display
6
will shine when the remote-controlled
socket is switched on.
j
The LED operating status display
6
will not shine when the remote-con-
trolled socket is switched off.
j
The LED operating status display
6
will flash when the dimmer function
has been activated.
Q
Setting-up operation
Q
Using the dimmer
radio-controlled socket
(FSD B 20-A) (fig. B)
1. Insert the remote-controlled socket
into an earthed household socket
and switch it on with the ON / OFF
switch
5
.
2. Switch the lamp on. The radio-con-
trolled socket can only carry out its
function when the lamp to be dimmed
is switched on.
3. Press the manual ON / OFF button
5
to switch the remote-controlled
socket on directly at the appliance.
The LED operating status display
6
will shine. Alternatively, you can also
switch the remote-controlled socket
on using the remote control (See
“Using the remote control FSS B
20-A”).
4. Press the manual ON / OFF button
5
to switch the remote-controlled
socket off directly on the appliance.
The LED operating status display
6
will go out. Alternatively, you can
also switch the remote-controlled
socket off using the remote control
(See “Using the remote control FSS
B 20-A”).
Adjusting the dimmer function
on remote-controlled socket
(FSD B 20-A):
1. Press the ON / OFF button
5
down.
The lamp will switch itself on and
the dimming process will start.
66538_silv_Funkschaltset_Content_GB-IE.indd 10
29.06.11 11:45