Silvercrest CM-3500 - Manual (Page 25)

SilverCrest Stereo Hi-Fi System CM-3500
English - 23
Recalling a Station from Memory
Recalling a station from a memory preset is possible via the remote control
only. Therefore, all buttons mentioned hereafter apply to the remote control.
ƒ During radio reception, press the MENU/FOLDER /PS + button (46) or the
MENU/FOLDER/PS - button (35). Each press of the button will toggle to
the next memory preset.
If no station has been stored, the default frequency will be
used.
Card Reader and USB Port
The card reader (9) and the USB port (6) located on the back panel of the
device let you enjoy music from an SD or MMC memory card or from a USB
memory stick. You can use storage media up to 8GB connected to your
device.
If there is any folder structure created on the storage media, it will be detected
by your Micro Stereo Hifi system and shown on the display (3). To change a
folder, press the MENU/FOLDER /PS + button (46) or the MENU/FOLDER/PS
- button (35) on the remote control.
You may also show the ID3 tags on the display to see the song texts (if any).
Press the DISPLAY button (10) on the device or the CLOCK/DISPLAY button
(29) on the remote control to toggle between showing the ID3 tags or the file
names.
Do not remove the inserted memory card or memory stick
before switching the operating mode to a different media. If
you remove the memory card or memory stick while a title is
being played back, loss of data may occur.
Inserting a Memory Card
ƒ Insert an SD or MMC memory card with the contacts facing towards the
back of the device into the card reader (9) until it clicks in place. The
inserted card will not completely disappear inside the card reader.