Silvercrest CM-3500 - Manual (Page 31)

SilverCrest Stereo Hi-Fi System CM-3500
English - 29
ƒ Press the TIMER button. The message "OFF TIME" will appear for a few
seconds on the display. Next, a time will be displayed with the hours
indication blinking.
ƒ You can now enter the power-off time.
ƒ Press the MENU/FOLDER /PS + button (46) or the MENU/FOLDER/PS -
button (35) to set the hours for the power-off time. In this example it will be
"07" (or AM 07, when using the 12-hour format).
ƒ Press the TIMER button. The minute indicator will start blinking.
ƒ Press the MENU/FOLDER /PS + button (46) or the MENU/FOLDER/PS -
button (35) to set the minutes for the power-off time. In this example "45".
ƒ Press the TIMER button. The last set operating mode will be shown.
ƒ Press the MENU/FOLDER /PS + button (46) or the MENU/FOLDER/PS -
button (35) to set the desired operating mode.
ƒ Press the Timer button. Programming is finished and the unit will switch
back to the previous state. The timer is enabled and a clock icon will
appear on the display.
Once a timer has been programmed, you can enable or disable it by pressing
the
TIMER button (42) multiple times. When enabling a timer, all settings will be
shown one after the other. If you want to change any of the settings, you have
to repeat the programming.
If you power the device off by using the On/Off button (25), all
timer settings will be erased. To avoid this, you can use
backup batteries for your Micro Stereo Hifi system. For more
information, read page 15.