Babytalker 1030, 3 activating privacy mode, 4 setting the parents' unit reception volume – Silvercrest BABYTALKER 1030 User Manual
Page 14: 5 setting the microphone sensitivity (vox), 6 feeding timer
Babytalker 1030
14
12.3 Activating privacy mode
The Babytalker 1030 operates on free frequencies (PMR - 446 MHz).
Any other PMR device in range and on the same channel can hear the transmitted baby monitor signal.
This also means that the parents’ unit can receive the signal from other PMR devices.
To minimise interference from other PMR devices, privacy mode must be activated on both the parents’
and baby unit.
Once the channel on the parents’ unit and baby unit is the same,
- press the
button once to activate privacy mode on the parents' unit.
- Press the
button once to activate privacy mode on the baby unit.
12.4 Setting the parents' unit reception volume
There are 8 volume levels.
- Press button
to increase the volume.
- Press button
to decrease the volume.
12.5 Setting the microphone sensitivity (VOX)
The baby unit operates on VOX mode. This means that the baby unit starts transmitting as soon as the
microphone detects sound. The sensitivity of the sound detection can be changed by the user.
When you increase the sensitivity, the baby unit picks up quieter sounds.
The VOX sensitivity can be adjusted by turning the VOX sensitivity switch
:
- Clockwise to the lowest VOX sensitivity position
- Anti-clockwise to the highest VOX sensitivity position
12.6 Feeding timer
The feeding timer is a count down timer that can be used for generating an alarm sound to remind you of
the next feeding or medicine time.
To turn on the count down timer and set the timer.
- Press and hold the set button
for 5 seconds. The feeding timer icon and feeding time interval
is displayed.
- Press the channel up
button to select the hour.
- Press the channel up
button to select the minutes.
- Press the set button
to confirm.
Once the alarm is audible, press any button (except the On/Off button) to deactivate.
•
When privacy mode is activated,
is displayed.
When privacy mode is activated, the baby unit will transmit the sound in the baby's room
for a short period of 5 seconds every 5 minutes. This reassures you that the baby unit is
operating. The function is not active in normal mode.
•
Only adjust the VOX level once you have set the channel and privacy mode.
10
17
8
6
24
10
3
4
10
HL_Babytalker 1030_LB4.book Page 14 Wednesday, March 16, 2011 10:06 PM