Silvercrest SSOT 6 A1 - Manual (Page 13)

13 GB
Safety

Please consult a doctor if the thermometer indicates
that the body temperature measured is high. With this
measuring method, a fever is indicated if the tempera-
ture is above 38.0 °C (100.4 °F). The red LED
6 is a
warning. Please take several measurements at intervals
of 0.5 to 1 hour in order to follow the progression of
the temperature. The values you measure will help
your doctor make a diagnosis.

Do not use the temperature under extreme temperature
conditions and / or outdoors. This will result in inaccurate
measuring results. Please observe the details regarding
ambient and storage temperatures (see “Technical data”).

The measurement sensor should not be touched directly
or be blown on. This will result in inaccurate measuring
results.

Mobile telephones should not be used in the immediate
vicinity when the thermometer is being used. Otherwise
the consequence may be inaccurate measurement
results.
Safety instructions

This appliance is solely intended for private use. That
is why it is not subject to mandatory verifi cation.

Discontinue using the appliance if it is damaged or if
you feel that the measured values are unrealistic. Con-
sult the chapter “Functions/Error analysis - Trouble-
shooting” for advice or contact our service centre.
IB_86673_SSOT6A1_LB4.indd 13 IB_86673_SSOT6A1_LB4.indd 13 21.11.12 09:53 21.11.12 09:53