Silvercrest SSOT 6 A1 - Manual (Page 25)

25 GB
Functions / error analysis
Measurements taken in ear and forehead mode are
automatically stored in the appliance. The measured
values are available again along with information on the
date, time and measurement mode when the “MEM / SET”
button
1 is operated in standard mode. Press the “MEM /
SET” button 1 once to retrieve the value of the last
measurement. The “Memory” symbol (memory mode), the
number of the measurement, date, time and measurement
mode will appear in the LC display
5 (Fig. G). By pressing
the “MEM / SET” button 1 the next storage space along
with its associated measured value will appear. A maximum
of 9 measurements can be stored.
In order to return to standard mode, proceed as follows:
1. Press the “FOREHEAD” button
4 and the “EAR”
button 3 repeatedly at the same time until the LC
display 5 again shows the room temperature, date
and time, as well as the symbol (Illustration D).
2. You are now in standard mode again.
 Changing the battery
The appliance is fi tted with a lithium battery (CR2032,
3 V
) that allows a lot of measurements to be taken. If
the battery is empty, you will be made aware of that by
means of an appropriate error message (see “Functions /
error analysis - problem-solving”).
IB_86673_SSOT6A1_LB4.indd 25 IB_86673_SSOT6A1_LB4.indd 25 21.11.12 09:53 21.11.12 09:53