Silvercrest SSOT 6 A1 - Manual (Page 24)

24 GB
Operation / Functions / error analysis
4. You can start a new measurement by pressing the
“MEM / SET” button 1 to delete the previously
measured time.
In order to return to standard mode, proceed as follows:
1. Press the “FOREHEAD” button
4 and the “EAR”
button 3 repeatedly at the same time until the LC
display 5 again shows the room temperature, date
and time, as well as the symbol (Illustration D).
2. You are now in standard mode again.
 Functions / error analysis
 Selecting the temperature unit

Press and hold down the “EAR” button 3 and the
“FOREHEAD” button 4 at the same time until “°F”
appears behind the temperature display. Switching
from “°F” to “°C” is possible with the same procedure.
 The memory function (memory mode)
 IMPORTANT!
The current measurement is always stored in the last storage
space. When all storage spaces have been occupied, the
oldest measurement is always deleted from the memory.
IB_86673_SSOT6A1_LB4.indd 24 IB_86673_SSOT6A1_LB4.indd 24 21.11.12 09:53 21.11.12 09:53