Silvercrest SSOT 6 A1 - Manual (Page 23)

23 GB
Operation
9. Press the “EAR” button 3 again to carry out further
measurements.
10. The appliance automatically switches off if it is not
operated for longer than 1 minute. This application is
not stored in the device.
In order to return to standard mode, proceed as follows:
1. Press the “FOREHEAD” button
4 and the “EAR”
button 3 repeatedly at the same time until the LC
display 5 again shows the room temperature, date
and time, as well as the symbol (Illustration D).
2. You are now back in standard mode.
 Measuring time (stopwatch mode)
The integrated watch can be used as a stopwatch in the
range of 0.01 seconds to 3 minutes. This function is required
to calculate the pulse rate. The appliance has to be switched
over to stopwatch mode to do so.
1. If the sleep mode has been activated, activate the
thermometer again by pressing any button before
taking a measurement.
2. Press the “FOREHEAD” button 4 and the “EAR”
button 3 repeatedly at the same time until the LC
display 5 shows the symbol (Illustration F).
3. The stopwatch is started by pressing the “FOREHEAD”
button 4 and stopped by pressing it again.
IB_86673_SSOT6A1_LB4.indd 23 IB_86673_SSOT6A1_LB4.indd 23 21.11.12 09:53 21.11.12 09:53