Silvercrest SSOT 6 A1 - Manual (Page 26)

26 GB
Functions / error analysis

Push the battery compartment lid 10 downwards.
Lever the battery 11 out with a small screwdriver.

Avoid short-circuiting the battery at all cost. A short-
circuit can occur if the screwdriver comes into contact
with the battery and the live parts in the battery
compartment at the same time.

Insert the new battery into the battery compartment.
Note: Ensure correct polarity. The plus sign on the
battery must point upwards.

Push the new battery under the metal nose and press
it down until it clicks into place.

Push the battery compartment lid 10 onto the battery
compartment until it clicks into place (Fig. A).
 Problem-solving
If the appliance cannot take a measurement in the
designated range, it will generate an error message.
This message should help to solve the problem.
Error Problem Solution
Appliance
does not re-
act / automat-
ically resets
itself when
protective fi lm
is removed Empty battery? Insert a new
battery
Wrong battery
polarity? Removing bat-
tery and insert it
correctly
Faulty battery
contact?
IB_86673_SSOT6A1_LB4.indd 26 IB_86673_SSOT6A1_LB4.indd 26 21.11.12 09:53 21.11.12 09:53