Silvercrest SMW 900 EDS B2 - Manual (Page 61)

- 58 -
2. Select the required mode (Hr 24 or Hr 12) by
turning the rotary knob r and then confirm
your selection by pressing the Start/quick start
button
r .
Note:
The time display will only appear once you turn the
rotary knob
r again, which enables you to
set the hour.
3. Select the required hour by turning the rotary
knob r and confirm your selection by
pressing the Start/quick start button r .
4. Select the required minutes by turning the rotary
knob r and confirm your selection by
pressing the Start/quick start button
r
.
The time display is now programmed.
To read the current time while the microwave is in
operation, press the Clock button
q ; the time
is then shown in the display 1 for a few seconds.
Standby mode
The microwave automatically switches over to stand-
by mode, and the time is displayed, if no button is
pressed for a longer period. The display illumina-
tion also dims a few seconds after switching over
to standby mode.
Setting the kitchen timer
The microwave oven is provided with a kitchen timer
which you can use independently of the microwave
operation.
1.
Press the TIMER button w while the appliance
is in standby mode. "0:00" is shown in the
display
1 along with symbol .
2. Now set the required time using the rotary knob
r
. You can select any time range from
10 seconds to 95 minutes.
3. Press the Start/quick start button r .
The appliance emits an acoustic signal. The
countdown begins. After approx. 3 seconds
the current time is shown once again. The
kitchen timer will continue to run in the back-
ground. If you want to check the kitchen timer
inbetween times, press the TIMER button
w.
The kitchen timer appears for a moment.
As soon as the set time period has expired, signal
tones sound.
Child lock
Engage this setting to prevent accidental activation
by children and other persons not familiar with the
operation of the appliance.
The symbol for the child lock
appears in the
display 1 , which means that the appliance cannot
be operated as long as this function is activated.
• Press the Stop/child lock button
e
and
hold it down until a signal tone is sounded and
the symbol for the child lock
appears in
the display
1. The buttons and the control dial
now no longer have a function.
• To deactivate the child lock, press the Stop/child
lock button e and hold it down until
a signal tone is sounded and the symbol for the
child lock
goes out.
Query functions
Query the time during operation
During the cooking process, press the Clock
button
q
. The time will appear for a few
seconds in the display 1.
Query the power level operation
During the cooking process, press the Microwave
button
6 . The activated power level will
appear for a few seconds in the display 1.