Silvercrest SMW 900 EDS B2 - Manual (Page 70)

- 67 -
Defrosting
Defrosting by weight
Note:
Always place the food to be defrosted on dishes
suitable for use in a microwave oven. Never place
it directly on the turntable
3!
You can use this function to defrost. The defrosting
time and the power level are calculated and set
automatically once you have entered the weight.
1.
When in standby mode, turn the rotary knob r
anticlockwise until "A-11" appears in the
display
1 and
flashes (see chapter
"Automatic menu").
2. Press the Start/quick start button r .
3. Now select the food to be defrosted by turning
the rotary knob
r .
The following appears in the display 1 :
"d-01" and for "beef"
"d-02" and for "pork"
"d-03" and for "poultry"
"d-04" and for "fish"
"d-05" and for "pizza"
"d-06" and for "fruit/vegetables"
"d-07" and for "potatoes"
4. When the required food appears in the dis-
play
1, press the Start/quick start button r
.
5. Turn the rotary knob r to set the weight.
The following weights can be set:
"d-01"/ / "beef" 100 - 1800g
"d-02"/ / "pork" 100 - 1800g
"d-03"/ / "poultry" 100 - 1800g
"d-04"/ / "fish" 100 - 1800g
"d-05"/ / "pizza" 100 - 900g
"d-06"/ /"fruit/vegetables " 100 - 900g
"d-07"/ / "potatoes" 100 - 900g
5. When the required weight appears in the dis-
play
1, press the Start/quick start button r
. The appliance will then automatically
calculate the required defrosting time.
Note:
To ensure optimum defrosting, it is necessary to turn
the food during the defrosting process. The applian-
ce will remind you to turn the food over by sounding
a signal tone and showing "turn" in the display
1.
Open the appliance door, turn the food and then re-
close the door. Press the Start/quick start button
r
to continue the defrosting process.
If you do not want to turn the food, just wait for the
signal tones to stop. The appliance will automatically
continue the defrosting process. We recommend that
you do turn the food. This will ensure even defrosting.