Ergotron 60-578 - Manual (Page 17)

888-60-182P-01 rev.D • 01/07
17 of 22
7
a
Hold Rail against wall and start
screws with washers.
b
Tighten screws with 13mm socket
head (power tool is recommended)
in the following sequence: 1st-lower
right; 2nd-upper left; 3rd-lower left;
4th-upper right.
DO NOT OVERTIGHTEN SCREWS!
For solid concrete applications, torque
screws to 60 in-lbs (6.8 N m).
Screws must be fully seated in order to
support applied load!
The minimum torque for screws in
solid wood studs is 60 in-lbs minimum
(6.8 N m)while the maximum torque is
82 in-lbs (9.3 N m).
7
a
ᇚ䔼䘧䴴೼๭ຕ
䜡ড়ൿ೜ᓔྟᮟ䕀㶎ϱ
b
⫼PPⱘ݁㾦㶎ϱߔ
 ᥼㤤Փ⫼⬉ࡼᎹ݋˅ᣝ✻ҹϟℹ偸
ᮟ㋻㶎ϱ˖
㄀ϔ˖ϟে㄀Ѡ˖ϞᎺ
㄀ϝ˖ϟᎺ˗㄀ಯ˖Ϟে
ϡ㽕ᮟᕫ䖛㋻ʽ

ᇍѢ⹀∈⊹ˈᇚ㶎ϱᮟࠄ㣅ᇌ
⺙ 1P 
㶎ϱᖙ乏ᅠܼࠄԡˈҹ֓ᬃᩥ䞡䞣ʽ
⹀᳼㶎ᷧⱘ㶎ϱ᳔Ԣ࡯ⶽЎ㣅
ᇌ⺙ 1P ᳔催Ў㣅ᇌ⺙
1P 
7
a
࡟࡯࡞ࠍოߦ᛼ߒઃߌߡޔࡢ࠶
ࠪࡖ࡯ࠍ૶↪ߒࡀࠫߩ
ขࠅઃߌࠍ㐿ᆎߒ߹ߔޕ
b
OOߩ࠰ࠤ࠶࠻ࡋ࠶࠼
㔚േ߇
ᅢ߹ߒ޿ ࠍ૶ߞߡޔ
ᰴߩ㗅ᐨߢࡀࠫࠍ✦߼߹ߔ Ԙฝ
ਅޔԙᏀ਄ޔԚᏀਅޔԛฝ਄ޕ
ࡀࠫߪ✦߼ߔ߉ߥ޿ࠃ߁ߦߒߡߊ
ߛߐ޿ޕ

ࠦࡦࠢ࡝࡯࠻ߦㆡ↪ߔࠆ႐วߪޔ
KPNDU
0O ߩ
࠻࡞ࠢࠍਈ߃߹ߔޕ
⹥ᒰߔࠆ㊀㊂ࠍᡰ߃ࠆߚ߼ߦߪޔࡀ
ࠫࠍቢోߦᝌ౉ߔࠆ
ᔅⷐ߇޽ࠅ߹ߔޕ
ᧁߦㆡ↪ߔࠆ႐วߩࡀࠫߩᦨዊ࠻࡞
ࠢߪKPNDU
0O ߢޔᦨ
ᄢ࠻࡞ࠢߪKPNDU
0O 
ߢߔޕ