Ergotron 60-578 - Manual (Page 9)

888-60-182P-01 rev.D • 01/07
9 of 22
4
ATTACH BRACKETS TO DISPLAY
a
Place Display Brackets (with pre-de-
termined fasteners) on back of display:
(y) The display brackets
should be centered verti-
cally on the back of the dis-
play - the distance between
the top of the bracket (y1)
and the top of the display
should be the same as the
distance between the bot-
tom of the bracket (y2) and
the bottom of the display.
(x) The display brackets
should be mounted to the
outer-most hole sets or as
wide as the rail can support,
not to exceed 750mm
(29.5”) apart.
b
Tighten screws with at least six,
full, 360° revolutions*, but do not over
tighten; over tightening may cause
damage to display and/or brackets.
*
Six full turns will ensure a minimum
thread engagement roughly equal to the
diameter of the screw. For instance, if the
screw diameter is 8mm, the minimum
thread engagement is also 8mm.)
4
ᇚᬃᶊᅝ㺙ࠄᰒ⼎఼Ϟ
a ᇚᰒ⼎఼ᬃᶊ ⫼乘ࠊⱘ㋻
೎ӊ˅
ᬒ㕂Ѣᰒ⼎఼㚠䚼
(y) ᰒ⼎఼ᬃᶊᑨᔧ
ሙЁൖⳈᅝᬒ೼
ᰒ⼎఼ⱘ㚠䚼
ৡ⿄"
ᬃᶊⱘ乊䚼
(y1)
੠ᰒ⼎఼ⱘ乊䚼
П䯈ⱘ䎱⾏ᑨᔧ੠
ᬃᶊᑩ䚼

(y2) Ϣᰒ⼎఼ᑩ䚼П䯈ⱘ
䎱⾏ᰃϔḋⱘDŽ
(x) ᰒ⼎఼ᬃᶊ
ᑨᔧᅝ㺙ࠄ
᳔໪䚼ⱘᄨ༫ˈ៪㗙䔼䘧㛑
໳ᬃᣕⱘᆑᑺ
ᆑᑺϡ䍙䖛PP
 ā DŽ
b 㟇ᇥᑺ⃵ⱘᅠܼᮟ䕀
ᴹᢻ㋻㶎ϱˈԚϡৃ䖛ᑺᢻ㋻˗
䖛ᑺᢻ㋻Ӯᇍᰒ⼎఼
ঞ៪ᬃᶊ䗴៤ᤳᆇDŽ
*
݁⃵ᅠܼᮟ䕀ህ㛑ֱ䆕
㶎㒍啓ড়໻㟈Ϣ㶎ϱⱘⳈᕘ
ⳌৠDŽ↨བˈབᵰ㶎ϱⱘⳈᕘ
ᰃPPˈ
㶎㒍啓ড়гᰃPPDŽ
4
ࡉ࡜ࠤ࠶࠻ࠍ࠺ࠖࠬࡊ࡟ࠗߦขࠅ
ઃߌࠆ
a
࠺ࠖࠬࡊ࡟ࠗࡉ࡜ࠤ࠶࠻ࠍ
੐
೨ߦ᳿ቯߒߚขࠅઃߌࡀࠫࠍ૶↪
ߒߡ ࠺ࠖࠬࡊ࡟ࠗߩⵣ㕙ߦ㈩⟎
ߒ߹ߔޕ
(y) ࠺ࠖࠬࡊ࡟ࠗࡉ࡜
ࠤ࠶࠻ߪ࠺ࠖࠬࡊ࡟ࠗⵣ
㕙ߢု⋥ᣇะߩਛᄩߦ૏
⟎ߔࠆᔅⷐ߇޽ࠅ߹ߔ
ࡉ࡜
ࠤ࠶࠻ߩ਄┵(y1)ߣ࠺
ࠖࠬࡊ࡟࡯ߩ਄┵ߩ〒㔌
߇ޔࡉ࡜ࠤ࠶࠻ߩਅ┵(y2)
ߣ࠺ࠖࠬࡊ࡟ࠗߩਅ┵ߩ
〒㔌ߣหߓߦߥࠆࠃ߁⸳
ቯߒ߹ߔޕ
(x) ࠺ࠖࠬࡊ࡟ࠗࡉ࡜
ࠤ࠶࠻ߪޔ৻⇟ᄖ஥ߩⓣ
߹ߚߪ࡟࡯࡞߇ᡰ߃ࠄ
ࠇࠆ㒢ࠅ᏷ᐢߊ
OO
̍ ࠍ⿥ㆊߒߥ޿ 
ขࠅઃߌߡߊߛߐ޿ޕ
b qߢዋߥߊߣ߽࿁ォ ߐߖ
ߡࡀࠫࠍ✦߼߹ߔޕߚߛߒޔ✦߼ߔ
߉ߥ޿ࠃ߁ߦߒߡߊߛߐ޿ޕ࠺ࠖࠬ
ࡊ࡟ࠗ߅ࠃ߮߹ߚߪࡉ࡜ࠤ࠶࠻ߩ
⎕៊ߩේ࿃ߣߥࠆ႐ว߇޽ࠅ߹ߔޕ
*
ቢోߦ࿁ォߔࠆߣޔࡀࠫጊߩ
ᦨዊߩ߆ߺว޿߇ࡀࠫߩ⋥ᓘߣᄢ૕
หߓߦߥࠅ߹ߔޕ଀߃߫ޔࡀࠫߩ⋥
ᓘ߇OOߩ႐วޔࡀࠫጊߩᦨዊ߆
ߺว޿߽OOߦߥࠅ߹ߔޕ