Silvercrest SKMH 1100 A1 - Manual (Page 92)

90
To close the blender jug 6, place the lid of the
fill opening with measuring scale 26 onto the
lid of the jug 25 with the opening downwards,
and lock it by turning it clockwise.
Caution!
Before you remove the lid of the fill opening
in the blender jug with measuring scale 26
you must reduce the speed to level 1, 2 or 3
to prevent food being thrown out.
You can briefly remove the lid of the fill
opening with measuring scale 26 to add
ingredients to the blender jug.
7.7 Boiling and steaming with the
cooking pot
1. Place at least 500 ml and at most 2 litres
of water in the blender jug 6:
– If the food is entirely under the water it
will be boiled;
– If the water does not completely cover
it, it will be steamed.
2. Place the ingredients in the cooking
pot 21.
3. Place the cooking pot 21 in the blender
jug 6.
4. Close the blender jug 6 with its lid 25
and the lid of the fill opening with
measuring scale 26.
5. Set the desired time.
6. Set up the desired temperature on the
“TEMP” control 13.
– The chosen temperature is shown on
the display 8;
7. Select speed 1.
8. Press the “ON/OFF” button 11.
The appliance will begin working.
7.8 Using the spatula
The spatula 23 is used to stir ingredients
and to remove the cooking pot 21.
Caution!
– The spatula 23 may not be used while
the mixer attachment 22 is in use
because the spatula 23 could become
jammed in the attachment 22.
– Don’t use any other kitchen tools to stir
your ingredients. They could get into
the blades and cause injuries or
damage.
– The spatula 23 is so constructed that it
does not come into contact with the
blade assembly 20 even when the
blades are rotating.
– Always stir in a clockwise
direction.
The spatula 23 is designed so that if
you stir clockwise, it cannot come into
contact with the blade assembly 20
even if the assembly is rotating.
RP93471 Küchenmaschine mit Heizung LB5 Seite 90 Donnerstag, 14. August 2014 3:36 15