When using a memory card, When using the lcd, En glish – Epson R-D1s User Manual

Page 13

Advertising
background image

13

En

glish

❏ If you use an extension cord with this product, make sure the total

amperage of all devices plugged into the extension cord does not
exceed the cord’s ampere rating.

❏ Never disassemble, modify, or attempt to repair the battery charger

by yourself except as specifically explained in this guide.

❏ Do not use power outlets controlled by wall switches or automatic

timers.

❏ Do not use power outlets on the same circuit as large motors or

other appliances that may cause voltage fluctuations.

❏ Avoid using outlets on the same circuit as photocopiers or air

conditioning systems that regularly switch on and off.

❏ Position this product’s power cord so that it will not be stepped on

or run over.

❏ Do not place any objects on the power cord or the battery charger.
❏ Keep the power cord straight at the ends and at the points where

it enters the transformer.

❏ The power cord should be placed to avoid abrasions, cuts, fraying,

crimping, kinking, and other damage.

❏ If you cannot insert the plug into the power outlet, contact an

electrician.

For US and Canadian users:

Use the power cord provided or a 6 to 10 foot UL-approved type SPT-2
or heavier type, 2 X 18 AWG cord with a 125 V 10 A plug and 125 V 7
A connector.

When using a memory card

❏ Only memory cards designed for the product’s specifications can

be used.

❏ The methods for using memory cards vary according to card type.

Be sure to refer to the documentation included with your memory
card for details.

❏ Do not remove the memory card while the power switch is on.

When using the LCD

❏ The LCD monitor on this product may contain a few small bright

or dark spots. These are normal and do not mean that your LCD
monitor is damaged in any way.

❏ If the LCD monitor on this product is damaged, consult your

dealer.

❏ If the liquid crystal solution contained in the LCD monitor on this

product leaks out and gets onto your hands, wash them thoroughly
with soap and water. If it gets into your eyes, flush them
immediately with water. If discomfort or vision problems remain
after a thorough flushing, see a doctor immediately.

❏ Only use a soft, dry cloth to clean the display. Do not use liquid or

chemical cleaners.

When storing, maintaining, or transporting the
camera

❏ Do not store this product outdoors.
❏ Do not store this product near water.
❏ Do not store this product in a location subject to high temperature

or humidity.

❏ Do not store this product in a location subject to rapid changes in

temperature or humidity.

❏ Do not store this product in a location subject to direct sunlight or

strong light sources.

Advertising