Epson R-D1s - Manual (Page 9)

9
En
glish
Basic Setup Menu
(Film Setting) Allows you to quickly switch film profiles to best
suit the shooting subject or environment. For
each film profile (Film1, Film2, or Film3), you can
assign Edge Enhance, Saturation, Tint, Contrast,
and NR (Noise Reduction). By default, Film1 is
preset for portrait, Film2 for landscape, and
Film3 for night pictures. Use Standard if no
particular profile is required.
Setting Description
Time and Date Sets the current date and time
(year, month, day, hours and minutes).
Date Format Selects date display format from the following:
YYYY/MM/DD (default setting),
MM/DD/YYYY,
DD/MM/YYYY
Power Save Timer Selects the length of time before the camera
enters the power save mode, in which the LCD
monitor is turned off automatically to reduce
power consumption.
The available settings are 3min, 5min (default
setting), 10min, or 20min.
Press any button to exit the power save mode.
Sequential Numbering Specifies whether to save images with a
sequential number (as part of the file name).
On (default): sequential numbers continue
even if the memory card is replaced.
Off: sequential numbers end and a new
sequence of numbers starts when the memory
card is replaced.
Setting Description
LCD Brightness Changes brightness of the LCD monitor.
Also shows the firmware version.
Language Selects the language for messages and menus
displayed on the LCD monitor from the
following: Japanese, English, French, German,
Italian, Spanish, Dutch, T (Traditional)-Chinese
Calibrate Needles Displays the Needle Calibration menu to adjust
the status gauge needles.
Dead Pixel Correction Corrects non-functional pixels so they are less
conspicuous on the LCD monitor. Repeat this
procedure every few months as necessary. For
the pixels that cannot be corrected with this
setting, try the Long Exp Noise Reduction
feature.
Note:
Be sure to attach the lens cap before executing
this function.
Make sure the battery has enough power left
when using this feature.
Quick View Displays the image on the LCD monitor (i.e.,
enters the playback mode) automatically
when you release the shutter.You can select
the time period during which each image is
displayed on the LCD monitor, from 3 sec or 10
sec.
Assign USER Button You can assign one of the following functions
to the
(USER) button: Delete, Lock,
Magnify, Print, and Film. By default, Delete is
assigned to this button.
Setting Description