MCZ Stub - Manual (Page 36)

C
O
C
C
N C
C
C
S
34
8-STUB OVERNIGHT COATING ASSEMBLY
FIG.5 SIDE PANELS ASSEMBLY FIG.6 SIDE PANELS ASSEMBLY
Before going ahead with the installation of the side panels, it is necessary to centre and secure the air adjustment knob. Use one hand to
hold the knob in axis (at the front) and with the other hand tighten the screw at the back of the stove.
Side panels assembly.
As with the central panel fix the metal frame “N/O” to the three ceramics “C” per side via the screws “D” (see pages related to the “ceramic
kit parts”). The metal panel “N” on the handle side has a cut-out (detail A). Position the intermediate ceramic “C” facing with the cut-out
(detail B) on the same side as the cut-out of the metal frame “N” and then towards the door opening. While the lower “C” and upper
ceramic “C” and the three ceramics on the side opposite “C” the door opening must have the cut-out on the rear part (FIG.5 detail B). After
mounting the panels, insert them in the pin S (fig.6) located at the bottom of the stove, at the back.