MCZ Stub - Manual (Page 38)

C
C
M
L
M
S
S
S
S
T
M
S
S
S
S
S
L
36
9 - ASSEMBLING THE TOP
STUB STOVE WITH UPPER OR REAR AIR OUTLET
Place the top support “M” on the stove, make sure the pins S underneath the top support go into the holes on the frame C of the side
ceramic panels and that the spacer “K” is positioned towards the door of the stove and is resting against the structure (see detail on the
next page). Then take the top “L” and place it on top of the top support “M”. Again, make sure the pins S match with the holes. In the case
of a rear smoke outlet, it is possible to cover the hole on the top B with the designated hole-cover (optional).
M TOP SUPPORT L TOP
L TOP ASSEMBLY M TOP SUPPORT ASSEMBLY