Marshall Electronics CV200-MB / M - Manual (Page 10)

- 10 -
10. SYSTEM : OFF/ON◀
1) COM.◀
① CAM ID : Set to Camera’s ID
< 0~255 steps, 0 >
② BAUDRATE : A measure of the Data transmission speed
< (2400,4800,9600,57600,115200), 115200 >
2) IMAGE RANGE : Setting a range of screen
<
FULL /COMP/USER > ◀
① FULL : SDI FULL Range output
② COMP : SDI compression Range output
③ USER : OFFSET(0~32 steps, 16 )
3) COLOR SPACE : HD-CrCb , YUV, HD-CrCb
4) FRAME RATE : Select the SDI output resolution and frame
- 59.94fps Camera -
① 59.9HZ : < 1080-29.97P ,1080-59.94P,1080-59.94i >
< 720-29.97P, 720-59.94P >
- 60fps Camera -
① 60HZ : < 1080-30P ,1080-60P,1080-60i >
< 720-60P >
5) CVBS : ON/OFF for Composite Video Signal
< OFF /ON >
6) COLOR BAR : Print out COLOR BAR pattern.
SDI and CVBS output simultaneously
<
OFF /ON >
7) LANGUAGE : Supported < ENG ,KOR,JAN,CHN(S),CHN >
8) CAM TITLE : Make a Camera’s name ◀
※
○○○○○○○○ :
0 ~9,A~Z
U , D - CHAR SELECT
L , R - POSITION
9) RESET : it will be making the setting value to default
11. EXIT
④ QUICK ZOOM : it cab be checking for motion detection at the same time it can be doing at Zoom In/Out.
< OFF /ON > ◀
1) ZOOM SPEED : Zoom Speed Function.
< LOW/
MIDDLE /HIGH >
2) TRACKING : Tracking function is trace feature. When “tracking function is On”, it is tracing something to the motion detection with Zoom in state.
<
OFF /ON >
3) REPEAT : When you set for “Repeat On”, it will be doing Zoom in again before the motion detection has operating. On the other hand, When you setting for
“Repeat OFF”, it will not be doing Zoom in again before the motion detection has operating.
⑤ MOTION OSD : it has chose to use or not to use the motion detection Box.
< OFF /ON >
⑥ TEXT ALARM : when the motion detects, it be shown Text Alarm
< OFF /ON >
⑦ SIGNAL OUT : setting for GPIO Signal’s On/OFF
< OFF /ON >