Precision Digital PD603 - Manual (Page 16)

Sabre P Model PD603 Process Meter Instruction Manual
16
Display Functions and Messages
The meter displays various functions and messages during se-
tup/programming and operation. The following table shows the dis-
played functions and messages with their action/setting description.
Display Parameter Action/Setting
setu Setup Enter Setup menu
inpt Input Enter Input menu
4-20 4-20 mA Set meter for 4-20 mA input
0-10 0-10 VDC Set meter for
10 VDC input
dec.p
Decimal point Set decimal point for process inputs
prog Program Enter the Program menu
scal Scale Enter the Scale menu
Cal Calibrate Enter the Calibrate menu
inp1 Input 1 Calibrate input 1 signal or program input 1
value
dis1
Display 1 Program display 1 value
inp2
Input 2 Calibrate input 2 signal or program input 2
value
dis2
Display 2 Program display 2 value
err
Error Error, calibration not successful, check signal
pass
Password Enter the Password menu
unlC
Unlocked Program password to lock meter
loCd
Locked Enter password to unlock meter
9999
-1999
Flashing display Overrange condition
Underrange condition