Precision Digital PD603 - Manual (Page 25)

Sabre P Model PD603 Process Meter Instruction Manual
25
Setting Up the Password (pass)
The Password menu is used to program a four-digit password to pre-
vent unauthorized changes to the programmed parameter settings.
Locking the Meter
Enter the Password menu and program a four-digit password.
For instructions on how to program numeric values see Setting Numeric
Values, page 18.
pass unlC 0 000
Program
Password
loCd
Run Mode
Record the password for future reference. If appropriate, it may be rec-
orded in the space provided.
Model:
Serial Number:
Password: __ __ __ __
Unlocking the Meter
If the meter is password protected, the correct password must be en-
tered in order to make changes to the parameter settings.
pass loCd 0 000
Enter
Password
unlC
Run Mode