RISCO Group ProSYS, Interactive Voice Module - Manual (Page 23)

Voice Module Programming and Operations Manual
23
Operations Menu
After the Status message, the following list of remote operations is
announced:
Option Page
To arm, press 1. 23
To disarm, press 2. 26
To bypass a zone, press 3. 28
To operate a Utility Output, press 4. 30
To change a Follow Me number, press 5. 31
To Listen and Talk, press 6. 34
To enter the message box, press 7. 35
To exit, press 0. 37
For a detailed description of how to carry out your required
operation, turn to its corresponding page number in the list above.
These options in the Operations menu vary according to system
status and your access rights. For example, the To arm the system
option is not announced if all partitions in your system are already
armed, and the Activate UOs option (for activating home
appliances) is not announced if the UOs in your system are not
defined as Follow Code , as described on page 30.
Arming the System
1
Arming your system enables its detectors to detect activity on your
premises.
To arm the system:
1.
From the Operations menu, press
1
. If you have more than 1
partition, the following message is announced:
To arm all partitions, press 1.
To arm by partition, press 9.
If you only have permision to arm 1 partition, the partition is
armed and the following message is announced:
[Partition x] armed.