RISCO Group ProSYS, Interactive Voice Module - Manual (Page 30)

30
Voice Module Programming and Operations Manual
4.
Enter the number of the next zone whose bypass status you want
to change.
-OR-
Press
*
to return to the
Operations
menu.
Operating Utility Outputs (UOs)
4 UO NO UO NO
The Utility Output option enables you to remotely operate (activate
or deactivate) up to 8 home appliances such as heating, lighting,
sprinkler systems and garage doors.
There are 2 types of appliances, each of which behaves differently
when activated:
Latched appliance:
Remains activated until it is deactivated.
Pulsed appliance:
Remains activated for a predefined number
of seconds, after which it is automatically deactivated.
Ask your installer which of your appliances are defined as latched
and which are defined as pulsed.
NOTES:
The Utility Output option applies to Utility Outputs that are defined as
Follow
Code
. Ask your installer for details about defining Utility Outputs in this way.
The default system message for a Utility Output is
output x
where
x
is the output
number. See page 14 for details about defining a name, such as
Heating,
for each
Utility Output.
To activate and deactivate UOs:
1.
From the
Operations
menu, press
4
. One of the following
messages is announced for every
Follow Code
UO that has been
assigned to a message, as described on page 14:
Message Description
To activate [output
x], press [x].
The appliance is defined as
latched
and
currently deactivated.
-OR-
The appliance is defined as
pulsed
.
To deactivate [output
x], press [x].
The appliance is defined as
latched
and
currently activated.