RISCO Group ProSYS, Interactive Voice Module - Manual (Page 42)

42
Voice Module Programming and Operations Manual
Chapter 5: On Premises Operation of
the MBU
The Message Box Unit enables you to play and record a message on
the premises. The Message is up to 10 seconds long. When you
record a new message, the last message is deleted.
To play a message:
Press the Play [ ] button. The recorded message will begin playing
automatically
To record a message:
1.
Press the [ ] button continuously for 2 seconds. The LED will start
a slow flash.
2.
Talk into the MBU from a distance of 3 cm. If you finish your
message before the time limit, press the [ ] key again.
3.
NOTE:
It is recommended to record the messages from the MBU mounted next to the keypad
When recording any of the zones, partition, UO or common messages you do not need to
press the [ ] button to start and stop the recording. The control of the message recording is
performed from the keypad.