General safety summary – RIGOL DS6000 Series User Manual
Page 26
RIGOL
II
RP1002C User’s Guide
General Safety Summary
Please review the following safety precautions carefully before
putting the instrument into operation so as to avoid any personal
injuries or damages to the instrument and any product connected
to it. To prevent potential hazards, please use the instrument only
specified by this manual.
Ground The Instrument.
The instrument is grounded through the Protective Earth lead of
the power cord. To avoid electric shock, it is essential to connect
the earth terminal of power cord to the Protective Earth terminal
before any inputs or outputs.
Observe All Terminal Ratings.
To avoid fire or shock hazard, observe all ratings and markers on
the instrument and check your manual for more information about
ratings before connecting.
Replace Fuse Properly
Make sure that no overvoltage (such as voltage caused by
thunderbolt) this product. Otherwise, the operator might be
exposed to electric shock.
Do Not Operate Without Covers.
Do not operate the instrument with covers or panels removed.
Avoid Circuit or Wire Exposure.
Do not touch exposed junctions and components when the unit is
powered.