Cleaning, Preparation for shipment, Cleaning preparation for shipment – RIGOL DS6000 Series User Manual
Page 39
RIGOL
RP1002C User’s Guide
7
Cleaning
To clean the probe exterior, use a soft cloth dampened in a
solution of mild detergent and water. To clean the core, open the
test clamp and clean the exposed core surfaces with a cotton swap
dampened with isopropyl alcohol (isopropanol). Lubricate the
clamp mating surfaces with light oil.
Note: Do not clean with solvents or abrasives. Do not immerse the
probe.
Preparation for shipment
A special box is provided to be used for this product, convenient
for storage and shipment. Please do not discard it. If the original
packaging is unfit for use or not available, use the following
packaging guidelines.
1 Use a sturdy shipping carton having inside dimensions at least
one inch greater than the probe dimensions.
2 Put the probe into a plastic bag or wrap to protect it from
dampness.
3 Place the probe into the box and stabilize it with light
packaging material.
4 Seal the carton with shipping tape.