Measurement connections – RIGOL DM3068 User Manual
Page 57
RIGOL
DM3068 Quick Guide
13
Measurement Connections
DM3068 was designed with many measurement functions and different
measurements have different connections. Do not discretionarily switch the
measurement function when measuring as it may cause damage to the multimeter.
For example, when the test leads are connected to the related current terminals, AC
voltage measurement should not be taken.
DCV Measurement ACV Measurement
DCI/ACI Measurement (Low Current) DCI/ACI Measurement (High Current)
NOTE:
In order to protect the multimeter, please execute DC/AC current
measurement following the requirements below:
1. Do not connect the 10 A and LO Sense/200 mA input terminals into the
current measuring circuit at the same time.
+
DCV
-
+
ACV
-
+ DCI/ACI -
-
DCI/ACI +