RIGOL DSA1030 - Manual (Page 21)

RIGOL
Quick Guide for DSA1000 Series 7
Front Panel Connector
Figure 3 Front Panel Connectors
1. USB Host
The analyzer may serve as a “host” device to connect to external USB
devices. This interface is available for USB flash device and the USB-GPIB
module. See the following connections:
USB flash device connection GPIB extended connection
Figure 4 USB Host interface connections
2. GEN OUTPUT 50Ω
The output of the tracking generator can be connected to a receiver
through an N male connector, see figure below. Note that the tracking
generator is valid only when the instrument is DSA1030-TG.