RIGOL DSA1030 - Manual (Page 6)

RIGOL
IV Quick Guide for DSA1000 Series
voltage components and 30 dBm
(1W) AC (RF) components.
Appropriate Use of Power
Meter.
If you are not sure of the
characteristics of signal under
measure, follow these
recommendations to ensure safe
operations: if a RF power meter is
available, use it to measure the
power level of this signal first; or
add a rated external attenuator
between signal cable and input
terminal of the instrument.
Maximum attenuation, reference
level and maximum span frequency
should be selected, so as to make
the signals displayed within the
screen.
Know About the Specification
Conditions of the Instrument.
For maximum performance of the
instrument, use the analyzer under
specified conditions.
Proper Use of Battery.
If a battery is supplied, it must not
be exposed to high temperature or
in contact with fire. Keep it out of
the reach of children. Improper
change of battery (note: lithium
battery) may cause explosion. Use
RIGOL specified battery only.
Handling Safety.
Please handle with care during
transportation to avoid damages to
buttons, knob, interfaces and other
parts on the panels.