Roth AV NEO 6.2 SoundCore : High Performance TV Sound Base - Manual (Page 14)

14 | Roth NEO 6.2 SoundCore User Manual
Roth NEo 6.2 SoundCore
Roth NEo 6.2 SoundCore Specifications
input Sources
• Bluetooth
• Line-in (3.5mm)
• Optical
• Aux (RCA)
• Coaxial (RCA)
Bluetooth
• FiHonest CSR BCS solution supporting BT 2.1
SBC & Apt-x decoders
Analogue differential output
line-in
• RCA input
• 500 mV RMS full scale input
Aux-in
• 3.5mm stereo mini-jack
• 500 mV RMS full scale input
Coaxial input
• 500 mV p-p input
• SPDIF format
• Stereo
• Up to 96 KHz sample rate at up to 24 bit PCM data
Optical
• SPDIF format
• Toslink compatible
• Stereo only
• Up to 96 KHz sample rate at up to 24 bit PCM data
hDmi
• HDMI 1.4
• 4 Input ports, 1 output port
• ARC support
• CEC support
• 12 bit deep full HD, Full 3D and 4K2K video
• MHL 2.0
• Stereo PCM support.
Will force to deliver only 2.0 PCM at 48KHz
Sub-out
• RCA connector, band-limited output
• 3rd order LPF, 100Hz
• 2v RMS output
NFC
• Auto pairing for for handsets and tablets that support this function
• Antenna located behind Roth logo on front of unit
• Automatically switches on Roth NEO 6.2 SoundCore when in
standby mode
• Switches the SoundCore to Bluetooth mode
Amplifiers
• ESMT class-D power-stages
• 6x10W capability @<0.1% THD+N
• 2x20W capability @<0.2% THD+N
Signal processing
• Sonic Emotion 3D DSP (SE-W58)
AC power
• ‘Internal PSU AC 100-240V – 1.5A 50-60Hz
keys
• 4 Tactile switches: Vol+, Vol-, Source, Standby
indicators
1 x RGB LED with the following indications
- Standby, LED is RED
- Bluetooth operation, LED is BLUE
- AUX in, LED is GREEN
- Line-in, LED is WHITE
- Coaxial, LED is YELLOW
- Optical operation, LED is PURPLE
- HDMI, LED is TURQUOISE
power
• Auto power off: 30 mins with audio not active
Remote Control
• NEC protocol with up to 22 keys using infrared. 5 meter range with
up to 30 degree incidence angle.
All specifications, features and dimensions are
subject to change without notice.
Roth Neo 6.2 SoundCore Manual UK EM.indd 14 06/05/2014 13:19