Roth AV NEO 6.2 SoundCore : High Performance TV Sound Base - Manual (Page 5)

rothaudio.co.uk | 5
USER MANUAl
ENgliSh
Proper disposal of this product. This label indicates that,
in the EU, electronic devices cannot be disposed of
with regular household waste. Please use the return or
collections systems of your municipality or contact the
seller where you purchased this product
CAUTiON
Never remove the back covers of the SoundCore as this can
expose you to very high voltages and other hazards. If the
system does not operate properly, unplug the audio system
and call your authorised dealer or service centre for advice.
Adjust only those controls that are covered in the instructions.
wARNiNg
to reduce the risk of fire or electric shock, do not expose this
SoundCore to rain or moisture.
the system should not be exposed to dripping or splashing
and objects filled with liquids, such as vases, should not be
placed on the system.
this SoundCore should only be connected to a mains socket
outlet with a protective earthing connection.
ElECTRiCAl iNFORmATiON
this system is fitted with a BS1363/A 13 amp plug. If it
is not suitable for your supply sockets it must be removed
and replaced with an appropriate plug. If the plug becomes
damaged and/or needs to be replaced please follow the
wiring instructions below. the plug removed must be disposed
of immediately. It must not be plugged into a supply socket
as this will be an electrical hazard. If the fuse needs to be
replaced it must be of the same rating and AStA approved
to BS1362. If the plug is changed, a fuse of the appropriate
rating must be fitted in the plug, adapter or at the distribution
board. If the fuse in a moulded plug is replaced, the fuse cover
must be refitted before the appliance can be used.
to prevent the risk of electric shock.
do not open this product.
no user- serviceable parts inside.
refer servicing to qualified service personnel.
risk of electric shock
do not open
Caution
CAUTION
to prevent electric shock do not plug a cable into
a wall outlet, extension cord, or other receptacle unless the metal
blades can be fully inserted to prevent blade exposure.
wiRiNg iNSTRUCTiONS
Follow the appropriate wiring instructions given below. In both
cases ensure that the outer sheath of the cable is firmly held
by the cable clamp.
the exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
the lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
SoundCore’s enclosure that may be of a sufficient magnitude
to constitute a risk of electric shock.
2 - CORE plUg
wARNiNg!
Do not connect either wire to the earth terminal.
This symbol indicates that this 2-core
appliance is Class II and does not require an
earth connection.
The wire coloured blue must be connected to the
terminal marked with the letter N or coloured black.
The wire coloured brown must be connected to the
terminal marked with the letter L or coloured red.
Blue
(Neutral)
Fuse
Brown
(Live)
wARNiNg! This appliance must be earthed.
3 - CORE plUg
The wire coloured green and yellow must be
connected to the terminal marked with the letter
E, or by the earth symbol or coloured green or
green and yellow.
The wire coloured blue must be connected to the
terminal marked with the letter N or coloured black.
The wire coloured brown must be connected to the
terminal marked with the letter L or coloured red.
Blue
(Neutral)
Fuse
Brown
(Live)
Green &
Yellow
(Earth)
Roth Neo 6.2 SoundCore Manual UK EM.indd 5 06/05/2014 13:19