Rugged Cams ELX DVR 16 Channel - Manual (Page 44)

ELX16-240 Basic Configuration
44 2003.09.06 (v 1.0) Rugged CCTV.
5.4.5. Setting by channel
Alarm Source (*=All)
- With “Alarm Source” menu, it is possible to select upto 4 sensor/MD and text input.
- For setting sensor/MD, press the related number button.
- Set text as “On/Off ” with [ARROW] button.
- Set a PTZ preset position according to alarm input.
Recording Speed/Quality
There are four conditions; Low/Standard/High/Custom.
All conditions except “Custom” synchronize “Speed (ips)” and “Quality” automatically; “Low” setting is
1ips/Q5 ; “Standard” setting is 5ips/Q5; “High” setting is 15ips/Q5. When using the “Custom” setting,
Speed (ips) and Quality can be set separately.
Pre Alarm (sec)
Set a value up to 10 seconds to record video Pre-Alarm.
Post Alarm (sec)
Set a value up to 60 seconds to maintain recording conditions Post-Alarm.