Rugged Cams ELX DVR 16 Channel User Manual
Page 55
Basic Configuration
ELX16-240
Rugged CCTV.
2003.09.06 (v 1.0)
55
DHCP can also be used for xDSL (PPPoE) interface. Sometimes, all computers on a Local Area Network
(LAN) share a single Floa ting / Dynamic IP address. In this case, the ELX16-240 should be assigned a
private IP address and have DHCP enabled. Users on the LAN can connect to the ELX16 -240 using the
private IP address and outside users can connect to the ELX16 -240 over the Internet.
IP Address, NetMask, and Gateway Address, DNS
Administrator may configure IP address, subnet mask, gateway address, and DNS addresses of ELX16-
240.
5.7.6.2. xDSL
If ELX16-240 is connected on xDSL line and needs PPPoE process, the network administrator should
configure the user ID and password for PPPoE. ID. The password may be acquired from the ISP that
installed the line. Once configured, the ELX16-240 will receive an IP address when it is connected on
xDSL line.
User ID/Password
When ELX16 -240 is connected to xDSL, access ID and Password should be entered.
Status