Rugged Cams ELX DVR 16 Channel - Manual (Page 54)

ELX16-240 Basic Configuration
54 2003.09.06 (v 1.0) Rugged CCTV.
5.7.6. Network
There are five sub-menus; Network, xDSL, HRS, Port Setting, and NTP Setting.
5.7.6.1. Network
This page is to define network type and set network addresses forELX16-240.
Type
This is to select proper network interface (Ethernet/xDSL) with which ELX16-240 is connected. If
ELX16 -240 is connected with Internet dedicated line, cable modem line or on LAN environment, select
network interface as ‘Ethernet.’
If ELX16-240 is connected on xDSL line that needs PPPoE process to connect to the Internet,
administrator should select ‘xDSL.’ However, if the xDSL line does not need PPPoE process,
administrator should select ‘Ethernet,’ even though ELX16-240 is connected on xDSL line.
DHCP
Basically, this menu is for the lines that have Ethernet interfaces such as Internet dedicated line, cable
modem line and LAN. If administrator activates ‘DHCP’ menu, all addresses are set automatically by
ELX16 -240 detecting them from DHCP server of your ISP. The detected addresses are not displayed on
the screen. The addresses do not need to be entered manually unless ‘DHCP’ is disabled.