Emerson iC200 - Manual (Page 18)

17
Adjusting The Wake Up Times
Your SmartSet ® clock radio has two separate alarms that can be set and used
independently. You may use the alarms to wake two people at different times, or
you may use one alarm for weekdays and the other for weekend wake up times.
The procedure for adjusting the wake up time is the same for both Alarm 1 and
Alarm 2.
1.) Depress and hold either the Alarm 1 or
Alarm 2
setting button. The display will
change from the correct time to the
Alarm 1 or Alarm 2 wake up time.
2.) While holding the Alarm 1 or Alarm 2 setting button, depress either the Tuning/
Skip (Clock/Time)
or buttons to move the display ahead or back to your
desired wake up time.
3.) When the desired wake up time appears on the display, release the Tuning/
Skip (Clock/Time)
or buttons. s.
NOTE: Be sure that you have set the wake up time correctly by observing
the AM indicator. If the AM indicator is ‘On’ the wake up time is “AM”. If the
AM indicator is ‘Off’, the wake up time is “PM”.
4.) When the desired wake up time (AM or PM) appears on the display, release
the Alarm 1 or Alarm 2 setting buttons.
iC200_042007.p65 20/4/2007, 15:43 17