Emerson iC200 - Manual (Page 32)

31
4.) Press the Power button to turn
this system ‘On’ if necessary and
press the Function button to
select the iPod function. The
“iPod” indicator appears in the
display.
5.) Set the volume control of this system to a medium – high level. Press the
VOLUME +
button until the volume level display is reading “50”.
6.) Press Play/Pause button on your iPod ® Shuffle to begin playback and
adjust the Volume control on the iPod ® until you achieve the desired level. If
necessary you can go back and make final adjustments to the volume level on
this system.
7.) To Pause, Skip Songs, or Stop playback use the controls on the iPod ® Shuffle
as usual. These functions cannot be operated by the controls on the main unit
or the remote control. When you stop playback and leave the iPod
® Shuffle
connected to the USB connector the battery charging circuit begins recharging
the iPod
® Shuffle battery immediately.
8.) When you are finished listening or charging your iPod ® Shuffle remove it from
the USB connector, switch the iPod ® Shuffle ‘Off’ and replace the protective
cap. Press the Power button on the main unit to shut the system ‘Off’.
iC200_042007.p65 20/4/2007, 15:43 31