Important safety instructions – Emerson iC200 User Manual

Page 2

Advertising
background image

1

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

1.) Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.
2.) Do not use this apparatus near water.
3.) Clean only with dry cloth.
4.) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
5.) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

6.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong is provided for your safety. If the provided plug does not

fit into your outlet, consult an electrician for replacement of the obsolete outlet.

7.) Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

8.) Only use attachments / accessories specified by the manufacturer.
9.) Unplug this apparatus during lightning storms or when unused for long periods of time.
10.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

11.) This appliance shall not be exposed to dripping or splashing water and no object filled with liquids

such as vases shall be placed on the apparatus.

12.) Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.

13.) Do not overload wall outlet. Use only power source as indicated.
14.) Use replacement parts as specified by the manufacturer.
15.) The product may be mounted to a wall only if recommended by the manufacturer.
16.) Upon completion of any service or repairs to this product, ask the service technician to perform

safety checks.

!

C AU T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrow-

head symbol, within an equi-

lateral triangle is intended to

alert the user to the presence

of uninsulated ‘dangerous voltage’

within the product’s enclosure

that may be of sufficient

magnitude to constitute a risk

of electric shock to persons.

The exclamation point within

an equilateral triangle is in-

tended to alert the user to

the presence of important

operating and maintenance

(servicing) instructions in

the literature accompany-

ing the appliance.

WARNING: TO REDUCE THE

RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER

( O R B A C K ) , N O U S E R

SERVICEABLE PARTS INSIDE

R E F E R S E R V I C I N G T O

Q U A L I F I E D S E R V I C E

PERSONNEL.

C A U T I O N

The Caution Marking maybe located at the bottom enclosure of the apparatus.

iC200_042007.p65

20/4/2007, 15:43

1

Advertising