SAF-HOLLAND XL-AS11011OM CBX40/CB-4000 Slider Suspension Systems - Manual (Page 8)

8 XL-AS11011OM-en-US Rev F · 2014-06-13 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Model Identification and Nomenclature
8
Figure 9
Figure 8 4. CBX40 Fusion Model Identification
The CBX40 Fusion suspension serial tag is located on the rear
crossmember (Figure 8).
NOTE: Refer to the serial number tag attached to the slider
rear crossmember for information (Figure 8).
NOTE: If the suspension serial tag is not legible or is not
available, it can identified by the appearance of
the equalizing beam. The CBX40 Fusion model will
have a cast beam with a hole forward of the axle
and a lower air spring mounting plate welded to it
(Figure 8).
NOTE: This manual applies to the suspension models
listed on the front cover. However, determine the
specific model number, write that information
below and refer to it when obtaining information
or replacement parts (Figure 9).
5. CBX40 Fusion Model Nomenclature
The sample tag illustrated will help interpret the information
on the SAF-HOLLAND
® , Inc. serial number tag. The part
number is on the first line. The model number along with the
suspension capacity are on the second line. The third line
contains the serial number (Figure 9).
TAG LOCATED ON
REAR CROSSMEMBER
HOLE FORWARD OF
AXLE AND WELDED
LOWER AIR SPRING
MOUNTING PLATE
CB X 40 - 48 16
CB Slider
Axle Capacity
Suspension Series
40,000 Tandem
5.75" Diameter Premium Axle
Slider Box Width
42" (1067 mm) Wide
48" (1219 mm) Wide
54" (1372 mm) Wide
Ride Height
15.5" (393 mm)
16" (406 mm)
16.5" (419 mm)
17" (432 mm)
18" (445 mm)