SAF-HOLLAND XL-AS11011OM CBX40/CB-4000 Slider Suspension Systems - Manual (Page 9)

XL-AS11011OM-en-US Rev F · 2014-06-13 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Model Identification and Nomenclature
9
6. CBX40 Model Identification
The CBX40 suspension serial tag is located on the rear
crossmember (Figure 10).
NOTE: Refer to the serial number tag attached to the slider
rear crossmember for information (Figure 10).
NOTE: If the suspension serial tag is not legible or is not
available, you can identify your suspension model
by the appearance of the equalizing beam. The
CBX40 model will have a full cast beam with no
hole forward of the axle and a 5.75" round axle
(Figure 10).
NOTE: This manual applies to the suspension models
listed on the front cover. However, we urge you to
determine your specific model number, write that
information below and refer to it when obtaining
information or replacement parts (Figure 11).
7. CBX40 Model Nomenclature
The sample tag illustrated will help you interpret the information
on the SAF-HOLLAND
® , Inc. serial number tag. The model number
is on the first line along with the suspension capacity. The second
line contains the part number and the serial number (Figure 11).
CB X 40 - 48 16
CB Slider
Axle Capacity
Suspension Series
40,000 Tandem
5.75" Diameter Premium Axle
Slider Box Width
42" (1067 mm) Wide
48" (1219 mm) Wide
54" (1372 mm) Wide
Ride Height
15.5" (393 mm)
16" (406 mm)
16.5" (419 mm)
17" (432 mm)
18" (445 mm)
Figure 11
Figure 10
TAG LOCATED ON
REAR CROSSMEMBER
FULL CAST BEAM
CONSULT SPECIFICATION FOR CAPACITY AND RECOMMENDED APPLICATION.
MODEL NO.
PART NO.
CAPACITY (LBS)
SERIAL NO.
SAF-HOLLAND, INC.