DE DIETRICH LZ9619E1 - Manual (Page 19)

GB
19
How to wash
Before washing your first load of
laundry, we recommend that you run a
cotton cycle at 60°C, with the machine
empty, in order to remove any
manufacturing residue from the drum and
tub.
Pour half a measure of detergent into the
main wash compartment and start up the
machine.
1. Place the laundry in the
drum
Open the door.
Place the laundry in the drum, one item at a
time, shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent
recommended by the manufacturer in a
graduated cup and pour it into the main
wash compartment
.
If you wish to perform a prewash, or a
INTENSIVE programme, pour detergent or
stain remover into compartment
.
Important!
Do not use normal detergent for the
INTENSIVE programme, always use a
STAIN remover.
P0005
P0006
3. Measure out the additive
If required, pour fabric softener into the
compartment marked
without
exceeding the “MAX” mark.
4. Switch the machine on
To switch the machine on, press the
ON/OFF
button: if the programme
selector dial is on the RESET position,
three flashing dashes will be displayed. If
the programme selector dial is positioned on
a wash programme, the duration of that
programme will be displayed.
5. Select the desired wash
programme
Turn the programme selector dial to the
desired position: the lights corresponding to
the different phases making up the selected
programme light on.
95
60
50
40
30
60
50
40
30 40
30
40
30
STOP
e