Extron electronic HSA 200SE - Manual (Page 15)

HSA 200/222 Series • Installation HSA 200/222 Series • Installation
Installation, cont’d
2-14
The Universal AC outlet is fully compatible with
Europlug, British, Indian, Danish, and Italian plug
types. See the universal AC outlet guide on the Extron
Web site,
www.extron.com , for compatibility details on
all plug types.
2 Computer video input (HSA 200 models only) — Plug the
VGA-UXGA output from a computer into this 15-pin HD female
connector.
3 Audio input connector (HSA 200 models only) — Plug a
3.5 mm stereo plug into this jack for unbalanced audio input.
Figure 2-14 shows how to wire the male plug.
Sleeve ( )
Ring (-)
Tip (+)
Figure 2-14 — Audio input connector plug
4 Power/Signal LED (HSA 200SE and HSA 200CE only) — This
LED lights green when power and an input signal are present.
The LED lights amber when power is present but no input
signal is present.
5 RJ-45 connectors — Plug a CAT 5 or CAT 6 twisted pair (TP)
cable into each of these RJ-45 female connectors for network,
data, or communication connections.
When cabling the front panel and the underside of the enclosure
(figure 2-15), ensure that the bottom RJ-45 connections match up
with the front panel RJ-45 connector locations. For example,
match the front panel RJ-45 (CAT 6) network, data, or
communications connection
5A with the underside RJ-45
connector
6A
and match
5B
with 6B .
If necessary, on the front panel, have a qualified service person
replace the connector icon by prying the old icon off of the
connector plug-in with a Tweeker (figure 2-16) and snapping a
new icon in place.
Bottom View
6B 6A
Front View 5A 5B
Figure 2-15 — Configuration of RJ-45 connectors
Icon La b el
Figure 2-16 — Changing the connector icon
2-15