Extron electronic HSA 200SE - Manual (Page 27)

HSA 200/222 Series • Reference Information HSA 200/222 Series • Reference Information
Reference Information, cont’d
A-9 A-8
Included Parts
Part Part number
HSA 200 and HSA 222 User’s Manual
RJ-45 connector bezel plug-in inserts (assorted colors) 70-201-01
Power supply, 100-240VAC, 50/60Hz, 12VDC
(HSA 200SE and HSA 200 CE only) 28-104-01
Tweeker
Routing Templates
Template Part number
HSA 200/HSA 222 US routing template 70-237-01
HSA 200/HSA 222 International routing template 70-237-02
Replacement Parts
Part Part number
HSA 200 gas lift 70-281-01
HSA 222 gas lift 70-281-02
Accessories
Part Part number
HSA 200 RJ-45 to RJ-11 Conversion Kit 70-231-01
HSA 222 RJ-45 to RJ-11 Conversion Kit 70-231-02
HSA 200/HSA 222 Flexible Conduit Adapter Kit 70-229-01
Top Plate Dimensions
The cutout dimension illustrations (figures A-1 and A-2) are not
to scale
and are for reference only. If you choose not to use
Extron’s metal routing template (chapter 2, Installation), the
dimensions on the illustrations will help you properly prepare
the mounting surface. The surface cutout area is the shaded area
on the diagrams. The cutout dimensions are provided.
For full size paper templates, visit the Extron Web site
(http://www.extron.com) or call the Extron S
3 Sales & Technical
Support Hotline.
0.5"
(1.3 cm)
5.875 0.0325"
(14.92 0.083 cm)
6.375"
(16.19 cm)
7.683 0.0325" (19.51 0.083 cm)
8.183" (20.78 cm)
0.5"
(1.3 cm)
SURFACE CUT-OUT
AREA = 7.683 0.0325"
(19.51 0.083 cm) x 5.875 0.0325"
(14.92 0.083 cm)
4.625 0.0325"
(11.75 0.083 cm)
5.125"
(13.02 cm)
5.970 0.0325" (15.16 0.083 cm)
6.470" (16.43 cm)
TEMPLATE IS NOT FULL SIZE.
SURFACE CUT-OUT
AREA = 5.970 0.0325"
(15.16 0.083 cm) x 4.625 0.0325"
(11.75 0.083 cm)
HSA 200S/HSA 200SE International Models
HSA 200S/HSA 200SE/HSA 222S US Models
Cut surface material
out along this line. Tilting Plate Top Panel Cut-Out Radius:
0.25" (0.6 cm)
User Access (Connectors and AAP Openings)
TEMPLATE IS NOT FULL SIZE.
User Access (Connectors and AAP Openings)
Cut surface material
out along this line. Tilting Plate Top Panel Cut-Out Radius:
0.25" (0.6 cm)
+ +
+
+ +
+
+
+
+
+
+
+
+
+
+
+
Figure A-1 — HSA 200S/HSA 200SE/ HSA 222S cutout dimensions